Print a site sign with a QR code for the fence. Workers and visitors scan it to do your site induction once, then sign in and out on every visit. No app. You see who’s on site right now.
Set up the sign
Open the project, click the Safety tab, then Set up sign.
A project with jobs on more than one lot shows a row for each site. Each site gets its own sign.
Check the details.
Footing fills in your business, your after-hours contact and the project lead. Fill in anything marked with a red star: your state needs it on the sign. In Victoria that includes the building permit and the building surveyor; in NSW, the principal certifier.
Pick the PPE and write your site rules.
These, the emergency details and your contacts are the site induction. Workers read them and sign.
Tick the SWMS workers sign.
Under SWMS workers read and sign, tick the project’s completed SWMS. Each worker ticks the ones that cover their work, reads them and signs them with the induction. The register shows who signed which.
Click Set up sign, then Download sign.
Fence sign 600 × 900 is ready for a print shop: print it on 5 mm corflute with 4 eyelets and cable-tie it to the fence. A3 and A4 are for your office printer.
What workers see
They scan the QR code with their phone camera.
The sign-in page opens in their browser, with your business name at the top. If their camera won’t scan, the web address is printed under the QR code.
First visit: their details, White Card and your induction.
They pick I’m here to work or I’m visiting, enter their name, mobile and email, and add their White Card with a photo of it. Visitors skip the card and say who they’re seeing. Then they read your induction, tick that they’ve read it, sign, and they’re signed in.
Every visit after: one tap.
Their phone remembers them, so they tap Sign in when they arrive and Sign out when they leave.
Your crew and subbies with a Footing login don’t need the QR code. On Today, a job at a site with a sign shows Sign in to site. It works with no signal too: the tap is saved with its time and sent when they’re back online.
Who’s on site
- Click Who’s on site on the project’s Safety tab to see everyone signed in now. Sign someone in is for anyone without a phone. The On site tab in Safety shows every site at once.
- On the dashboard, On site today shows who has signed in: a filled circle has signed in, a hollow one is booked but hasn’t yet. Anyone signed in without a booking is listed too, and you get a notice.
- Signing out records their hours for the day against the job they were booked on, as site attendance. It isn’t a timesheet.
- In an emergency, tap Evacuation roll call and tick people off as you see them at the assembly point. See Evacuation roll call.
- Anyone still signed in when the site finishes for the day is signed out and marked Exit unconfirmed, because nobody saw them leave.
- Register lists every visit. Fix time corrects a time with a reason; the original time stays on the record. Export CSV gives you a copy for an inspector.
For one-off safety forms by link, see Site inductions with a QR code.
Sign people out when they leave
People who sign in with the Footing app can choose to be signed out automatically when they leave the site. It cuts down on Exit unconfirmed at the end of the day.
Go to Settings, Safety policy, Site sign-in, and click Download surveillance notice.
Give it to everyone who signs in with the app. Workplace surveillance law in NSW and the ACT asks for written notice 14 days before tracking starts, so Footing applies that everywhere.
Turn on Sign people out when they leave site and record the date you gave the notice.
It starts 14 days after that date.
Each person turns it on for themselves on Today, under Sign in to site.
Their phone asks to allow location all the time. From then on, when they sign in, their phone watches a circle around the site. When they leave it, they’re signed out at that time.
Related guides
Still stuck? Email support@folkware.com.au and tell us what you were trying to do.